This post is also available in:
Deutsch (German)
The CUE ONE is a high output low profile 3-way monitor which exceeds the highest expectations on stage. It combines the innovative CODA Audio driver and system technologies. It’s a double 12″ box, loaded by an asymmetrical 60° x 55° + 40° elliptical waveguide.
Thanks to its patented 1.4″ coaxial neodymium ring diaphragm driver, it offers impressive directivity dispersion. Double 12″ high power neodymium drivers are highly efficient and provide controlled low frequency reproduction down to 50 Hz (-6 dB). The advanced design aligns the acoustical centres of the transducers to produce a single point source. This unique loudspeaker technology provides a coherent wave front without hotspots. The precise directivity ensures uniform coverage with perfect time alignment between the components.
Due to the low crossover point the coaxial ring diaphragm driver ensures exceptional speech intelligibility and simultaneously high gain-before-feedback. The CUE ONE can be operated either in 1-way passive or 2-way bi-amp mode.
The reduction in physical size as well as its elegant cable connection at the bottom of the cabinet make the CUE ONE particularly useful not only on stage but also in applications where visual restrictions in placement play their part. Thanks to the integrated feet, the dispersion angle can be increased by 5 degrees.
M6 threaded points complete the possibilities with optional accessories and allow placement in specific applications such as TV studios, theatres, cinemas, etc.
CUE ONE has been designed to work exclusively with CODA Audio LINUS DSP Amplifiers with Loudspeaker Management as an integrated solution for DSP, amplification, network remote control, optimal performance, protection, as well as extensive possibilities for system tuning and monitoring.
System Solutions
NO. 1: 4x CUE ONE PASSIVE
SYSTEM COMPONENTS:
4x CUE ONE
1x LINUS12C
NO. 2: 2x CUE ONE BI-AMP
SYSTEM COMPONENTS:
2x CUE ONE
1x LINUS12C
Specification
Type: |
High Output 3-way Stage Monitor |
Application: |
Stage monitor |
Frequency response: |
50 Hz – 22 kHz (- 6 dB) |
Power handling AES: |
2000 W |
Peak Power: |
8000 W |
Sensitivity:* |
104 dB |
Max. SPL peak: |
143 dB |
Amplification, Cabinets per Amplifier: |
|
LINUS5-C Optimum / Maximum: |
2/2 bi-amp or 4/4 passive |
LINUS10-C Optimum / Maximum: |
2/2 bi-amp or 4/4 passive |
LINUS12C Optimum / Maximum: |
2/4 bi-amp or 4/8 passive |
LINUS14 Optimum / Maximum: |
2/4 bi-amp or 4/8 passive |
Dispersion: |
|
Horizontal: |
60° |
Vertical: |
95° (40° up, 55° down) |
Components: |
|
Low frequency: |
2 x 12″ neodymium woofer 4″ (101.6 mm) voice coil, 1000 W |
High frequency: |
1.4″ neodymium coaxial driver 3.5″ (90 mm) + 1.75″ (44.4 mm) voice coil, 150 W + 80 W |
Crossover: |
750 Hz passive or bi-amp (internal connector), 6.3 kHz passive |
Nominal impedance: |
4 Ω (1+/1-) / 8 Ω (2+/2-)
3-way passive: 4 Ω (1+/1-) |
Input connectors: |
2x Neutrik™ NL4MP |
Suspension: |
M6 fixing points |
Enclosure material: |
Birch plywood |
Finish: |
Polyurea coating (water resistant) |
IP rating (IEC 60529): |
IP53 |
Weather protection options: |
Standard IP55: IP55 (direct cable)
MG1 (Marine Grade 1): IP55 |
Dimensions (WxHxD): |
670 x 322 x 627 mm / 26.38 x 12.68 x 24.69″ |
Net weight: |
32 kg / 70.55 lbs |
* Measured with pink noice 6 dB crest factor. Half-space loading.
Accessories
-
A1HC
This post is also available in:
Deutsch (German)
Horizontal U-bracket for CUE ONE
-
-
-
-