This post is also available in:
Deutsch (German)
Overview
The APS-Pro-S is a compact, 3-way arrayable point source loudspeaker, designed for small and medium-sized venues where a scalable and powerful solution is required.
In the APS-Pro-S, mid and high frequencies are reproduced from a single source, CODA’s Dual Diaphragm coaxial Curved wave driver (DDC). Its output pattern is controlled by a magnetic InstaFit APS-COUPLER. Couplers combine all elements of the loudspeaker into a single, pattern-controlled wavefront.
Two 10” high-excursion low distortion neodymium drivers are thermally coupled to a shaped aluminium baffle that also forms the cabinet’s reflex ports. This exclusive Dynamic Airflow Cooling technology, or DAC, takes heat away from drivers, increasing power handling and significantly reducing power compression. With carbon fibre diaphragms providing increased stiffness and reduced moving mass, these advanced drivers work down to 50 Hz with impact and control. Mounted horizontally, each APS-Pro-S cabinet provides a fixed 30° vertical coverage and can be flown singly or with additional APS-Pro cabinets in vertical arrays to match the system’s output to any requirement. Horizontal coverage can be changed between 60°, 90°, and 120°, and asymmetrical configurations of 75°, 90° and 105° by using different InstaFit APS-COUPLER configurations.
Mounted vertically, each APS-Pro-S cabinet provides a fixed horizontal coverage of 30°, with the variable dispersion now being in the vertical plane. When paired with APS-SUB, an APS-Pro system extends down to 28 Hz. APS-SUB can be flown with APS-Pro beneath or used as a base for interlocked ground stacks or with pole-mounted APS arrays.
System Solutions
Full Range 12x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
12 x APS-Pro-S
1x LINUS12C / LINUS14D
Full Range 2x APS-Pro-D + 2x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
2x APS-Pro-D
2x APS-Pro-S
1x LINUS12c / LINUS14D
Full Range 2x APS-Pro-D + 4x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
2 x APS-Pro-D
4x APS-Pro-S
2x LINUS6.4i
Full Range 2x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
2 x APS-Pro-S
1x LINUS6.4i
Full Range 4x APS-Pro-D + 4x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
4x APS-Pro-D
4x APS-Pro-S
1x LINUS12C / LINUS14D
Full Range 6x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
6 x APS-Pro-S
1x LINUS6.4i
Full range 2x APS-Pro-S
FULL RANGE
SYSTEM COMPONENTS:
2x APS-Pro-S
1x LINUS6.4
Sub / Top 2x APS-Pro-S + 2x APS-SUB
SUB / TOP
SYSTEM COMPONENTS:
2x APS-Pro-S
2x APS-SUB
1x LINUS12C / LINUS14D
Sub / Top 4x APS-Pro-D + 4x APS-Pro-S + 6x APS-SUB
SUB / TOP
SYSTEM COMPONENTS:
4x APS-Pro D
4x APS-Pro S
6x APS-SUB
2x LINUS12C / LINUS 14D
Sub / Top 4x APS-Pro-S + 2x APS-SUB
SUB / TOP
SYSTEM COMPONENTS:
4x APS-Pro-S
2x APS-SUB
2x LINUS6.4i
Sub / Top 4x APS-Pro-S + 6x APS-SUB
SUB / TOP
SYSTEM COMPONENTS:
4x APS-Pro-S
6x APS-SUB
1x LINUS12C / LINUS14D
Specification
| Type: |
3-way Passive Arrayable Point Source |
| Frequency response: |
50 Hz – 22 kHz (-6 dB) |
| Power handling AES peak (passive): |
1400 W / 5600 W |
| – Low AES / peak: |
N/A |
| – Mid / High AES / peak: |
N/A |
| Maximum peak SPL (with LINUS14) |
144 dB (A)* |
| Amplification, cabinets per amplifier (Optimum / Maximum): |
|
| LINUS6.4 – BTL: |
6/6 |
| LINUS12C: |
12/12 |
| LINUS14: |
12/12 |
| Dispersion horizontal: |
Symmetrical 120°, 90° or 60°. Asymmetrical 105°, 90° or 75°. Dependent on APS-COUPLER in use. |
| Dispersion vertical: |
30° |
| Components: |
|
| Low frequency: |
2x 10″ neodymium, water resistant cones 3″ (77 mm) voice coil, 700 W (AES) each |
| Mid / High frequency: |
9” DDC (Dual Diaphragm Curved-wave Driver)
MF: 3.5” (90 mm) voice coil, 150 W (AES)
HF: 1.75” (44.4 mm) voice coil, 80 W (AES) |
| Crossover point: |
3-way passive 650 Hz / 6.3 kHz |
| Input connectors: |
2x Neutrik™ NL4MP |
| Nominal impedance LF / MF+HF: |
12 Ω (2+/2-) |
| Enclosure material: |
Hybrid birch plywood / Aluminium |
| Finish: |
Polyurea black coating |
| Flying hardware: |
Integrated |
| IP rating (IEC 60529): |
IP54 |
| Weather protection options: |
Standard IP55: IP55 (Amphenol connectors)
MG1 (Marine Grade 1): IP55 |
| Dimensions (WxHxD): |
674 x 333 x 491 mm / 26.54 x 13.11 x 19.33″ |
| Net weight: |
26.4 kg / 58.2 lbs |
* Measured with pink noise 12dB Crest Factor (A-Weighted).
Accessories
-
FRV-APS
This post is also available in:
Deutsch (German)
Frame for vertically arrayed APS or APS-SUB
-
AV-APS
This post is also available in:
Deutsch (German)
U-Bracket for up to 2x APS, vertically stacked or flown
-
BAR-APS
This post is also available in:
Deutsch (German)
Frame for horizontally arrayed APS Cluster
-
CU-APS
This post is also available in:
Deutsch (German)
Distance pole adapter for vertically stacked APS
-
-
FRH-APS
This post is also available in:
Deutsch (German)
Quick lock flying frame for horizontally arrayed APS or HOPS12T-Pro
-
FRV-DA-APS
This post is also available in:
Deutsch (German)
Pullback adapter plates for vertical arrayed APS or APS-SUB
-
GA-APS
This post is also available in:
Deutsch (German)
Groundstack adapter for APS/APS-SUB
-
GAH-APS
This post is also available in:
Deutsch (German)
Groundstack adapter for horizontally stacked APS
-
-
-
-
DOT-APS
This post is also available in:
Deutsch (German)
Transport dolly for 4x APS / APS-Pro
-
CO-APS-4
This post is also available in:
Deutsch (German)
Protection cover for 4x APS / APS-Pro
