Menu

LINUS M-RACK :

Compact 4-Channel Touring Rack

LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo
LINUS M-RACK Photo

One LINUS14D amplifier in a 3U case

  • 19”/3U Mobile Rack including 1x LINUS14D, LINUS PAN-M, Internal Cable set


Main Features

  • One LINUS14D amplifier in a 3U case
  • 4x 3500 W @ 4 Ohm
  • Selectable inputs: Analog, AES over Ethernet, LiNET and DANTE
  • Outputs on NL4, NL8
  • 5-pin XLR comparator inputs for use with CODA Audio sensor controlled subwoofers
  • All connectors at the front for easy workflow
  • Sliding door for quick access
  • Protection grille on the rear for connectors protection
  • Can drive all CODA Audio loudspeaker systems

This post is also available in: Deutsch (German)

Overview

The LINUS M-RACK continues CODA Audio’s comprehensive system-based approach by providing a single LINUS14D DSP/amplifier with a CODA PAN-M connector panel in a compact 3U rack package. As the LINUS14D is capable of powering every loudspeaker in the CODA catalogue, the M-RACK makes every smaller portable CODA system as clean and flawless in terms of aesthetics and connectivity as it is in terms of system performance.

Specification

 

GENERAL
Components 1x LINUS14D
1x PAN-T Connecting Panel
1x PDU-T Power Distribution Unit
1x Enclosure, sliding doors on front  side, protection grille on the rear side
Connecting panel front side PAN-M
Non powered connecting panel including integrated cabling system
Analog 4x XLR Input
1x etherCON® analog Input/ Link
LINET (AES/EBU) 1x etherCON® Input (8x signal channels)
1x etherCON® Output (8x signal channels)
DANTE 1x etherCON®
Remote Control 1x etherCON® Input
1x etherCON® Output
Recessed push button to select AES over Ethernet signal input
AES over Ethernet activated (Black Pushbutton): Transport of remote control incl. 4x LINET (AES/EBU) signal channels on ETHERNET marked etherCON® connectors enabled. PRIM = Input / SEC = Link
LINET activated (Yellow Pushbutton): LINET signal and remote control sockets seperated
Outputs 2x Neutrik NL4 speakON®
1x Neutrik NL8 speakON®
Sensor Control Connection 2x XLR5
Power PAN-M connecting panel is suited with a cable link through the unit
AC input Schuko 16A 230V/-190cm
Physical
Enclosure material Birch plywood
Finish Polyurea coating
Dimensions (WxHxD) 528 x 195 x 652 mm / 20.79” x 7.68” x 25.67”
Shipping dim. (WxHxD) 555 x 240 x 685 mm  / 21.85” x 9.45” x 26.97”
Net weight 31.5 kg /  69.45 lbs.
Shipping weight 37 kg / 81.57 lbs.

* Typical values – some variation may exist due to component tolerances.
**Voltage range should not be exceeded. Amplifier output power performance will degrade below nominal voltage & increase above nominal voltage.

Downloads

FileAction
LINUS14/14D Data Sheet (English)Download 
LINUS14/14D Datenblatt (Deutsch)Download 
LINUS14/14D User ManualDownload 
Dante Firmware Update LINUS14DDownload 
LINUS M-Rack CAD Drawing 2DDownload