This post is also available in:
English (Englisch)
ViFORCE™ – Advanced Wideband Cardioid Line Array System
The dual 8” forward-facing low-frequency drivers, combined with side-firing 6.5” drivers, create a unique configuration that delivers the LF performance of a larger system to the audience while achieving superior rear cancellation over a much wider bandwidth than conventional cardioid designs. This enables a quieter stage environment and greater low-frequency extension across the array.
The mid/high section features CODA’s patented DDP (Dual Diaphragm Planar wave driver), a true single-point acoustic source that seamlessly integrates with the wavefront transformer. This produces an impeccably phase-coherent wavefront with minimal intermodulation distortion (IMD) and total harmonic distortion (THD). The result is extraordinary low distortion, exceptional transient response, and vividly clear mid/high reproduction – delivering a fatigue-free, highly engaging listening experience.
CODA’s patented Dynamic Airflow Cooling (DAC) technology further enhances performance and reliability. Heat is efficiently dissipated from voice coils through the driver chassis into aluminium baffles integrated within the hybrid cabinet structure – enabling sustained high-output performance and unmatched touring flexibility.
ViFORCE™ offers unmatched adaptability in both horizontal and vertical planes. InstaFit couplers and the Quick-Release Grille enable tool-free changes between 90°/120° symmetric or 105° asymmetric horizontal coverage in seconds.
Despite its compact footprint, ViFORCE™ scales effortlessly to arenas up to 10,000 capacity when flown with the SUB FORCE™ 35 low-frequency extension. A dedicated 200 Hz low-pass preset adds substantial LF reinforcement to the array, while a separate 75 Hz subwoofer preset transforms the same enclosure into a standalone subwoofer – minimising inventory while maximising deployment flexibility.
Systemlösungen
6x ViFORCE + 2x SUB FORCE 35
12x ViFORCE + 2 SUB FORCE 35
24x ViFORCE + 8x SUB FORCE 35
24x ViFORCE + 16x SUB FORCE 35
36x ViFORCE + 24x SUB FORCE 35
Spezifikation
| Type: |
Compact 4-way Cardioid Line Array System for Medium Events with Adaptable Directivity Control |
| Frequency response: |
45 Hz – 21 kHz (-6 dB) (@50 Hz for 6x ViFORCE™) |
| Power handling Front (LF/MF/HF) AES / peak: |
1000 W / 4000 W |
| Side (cardio section) AES / peak: |
700 W / 2800 W |
| Maximum peak SPL (with LINUS14):* |
155 dB (A) |
| Amplification, cabinets per amplifier: |
|
| LINUS14 Optimum / Maximum: |
4 |
| Dispersion horizontal: |
90°, 120° or asymmetrical 105° Wideband Cardioid™ |
| Dispersion vertical: |
0.5°, 1°, 1.5°, 2.5°, 3.5°, 4°, 5°, 5.5°, 7°, 8.5° , 10° |
| Components: |
|
| Low frequency: |
Front: 2x 8″ neodymium, water resistant cones, 2.5″ VC, Side: 2x 6.5″ neodymium, water resistant cones, 2″ VC |
| Mid/High frequency: |
8″ DDP (Dual Diaphragm Planar-wave-driver) |
|
Mid: (400-6.300 Hz) annular diaphragm with 3.5″ VC |
|
High: (6.3-21 kHz) annular diaphragm with 1.75″ VC |
| Crossover point: |
Front: 600 Hz / 6300 Hz passive; Side: 300 Hz active |
| Input connectors: |
Neutrik™1x NLT4M + 1x Link cable with NL4FXX-W-S |
| Nominal impedance LF / MF+HF: |
Front: 16 Ohm (1+/1-); Side: 16 Ohm (2+/2-) |
| Enclosure material: |
Hybrid: Birch plywood / Aluminium |
| Finish: |
Polyurea coating |
| Suspension: |
Integrated 3-point rigging |
| IP rating (IEC 60529): |
IP54 |
| Weather protection options: |
Standard IP55: IP55 (Amphenol connectors)
MG1 (Marine Grade 1): IP55 |
| Dimensions (WxHxD): |
594 x 249 x 543 mm / 23.39″ x 9.77″ x 21.38″ |
| Net weight: |
29 kg / 63.93 lbs |
* Measured with pink noise 12 dB Crest Factor (A-weighted).